LPP-175 Technical Specifications

Standard test conditions: 25C, 1000W/m², AM1.5 spectrum

Under normal conditions, a photovoltaic module is likely to experience conditions that produce more current and/or voltage than reported at standard test conditions. Accordingly, the values of Isc and Voc listed above should be multiplied by a factor of 1.25 when determining component voltage ratings, conductor ampacities, fuse sizes, and size of controls connected to the PV output.

Busbar dimensions: 6mm X 0.3mm with PbSn solder coating

NREL Qualification Plus Testing Results

Currently undergoing testing to the NREL Qualification Plus standards. TC 500 test results show power output degradation at less than 2%.