Solar S Tile
Lumeta™ Solar Tiles. Integrated Tile Designs that Replace Roof Tiles.
Each Lumeta Solar S Tile displaces approximately three traditional concrete or clay tiles, so the tiles designs are customized to fit exactly the dimensions of major tile manufacturers. The actual solar laminate is a standard glass superstrate, with EVA encapsulation and TPT™ (Tedlar®/ Polyester /Tedlar®) substrate construction, and utilizes monocrystalline cell technology.
The profiled Solar S Tile module allows for full integration with the roof system – so your roof can look great while it’s producing clean, renewable energy. Lumeta Solar S Tiles are available in the most popular clay and concrete tile colors.
The Lumeta Solar S Tiles are designed to be installed as the matching profiled tile roof system is being installed. The electrical connections are housed in grooves in the bottom side of the Tiles, hiding all connections from view. Tiles are daisy-chain connected using standard connectors (Quick Connect), thus limiting the number of penetrations to one or two per solar array. The result is an integrated look that does not compromise the aesthetics of concrete or clay profiled tile roofs.
|Peak Power (Pmax)
|Maximum Power Point Voltage (Vmpp)
|Maximum Power Point Current (Impp)
|Open Circuit Voltage (Voc)
|Short Circuit Current (Isc)
|Cells per Module:
||125 mm x 125 mm
||17 inches (432 mm)
||38.125 inches (968 mm)
||3 inches (76 mm)
Concrete and Clay Profiled TilesRoof Slope
3:12 (14°) or greater